| 铝合金流变成形标准试样的压铸模设计 |
| |
| 引用本文： | 陈颖,安萍,谢礼志,赵君文.铝合金流变成形标准试样的压铸模设计[J].轻合金加工技术,2007,35(9):22-24,54. |
| |
| 作者姓名： | 陈颖 安萍 谢礼志 赵君文 |
| |
| 作者单位： | 1. 华中科技大学,湖北,武汉,430074;荆门职业技术学院,湖北,荆门,448002
2. 华中科技大学,湖北,武汉,430074 |
| |
| 摘 要： | 根据铝合金半固态浆料的充型特点，为防止出现卷气、夹杂和充型不完整等常见缺陷，设计了一套铝合金流变成形标准试样的压铸模具。用该模具成形的试样可用于铝合金流变成形工艺、组织与性能的研究。
|
| 关 键 词： | 铝合金 流变成形 标准试样 压铸模 |
| 文章编号： | 1007-7235（2007）09-0022-03 |
| 修稿时间： | 2007-03-15 |
Design of die-casting mould for rheomolding standard samples of aluminum alloy |
| |
| CHEN Ying,AN Ping,XIE Li-zhi,ZHAO Jun-wen.Design of die-casting mould for rheomolding standard samples of aluminum alloy[J].Light Alloy Fabrication Technology,2007,35(9):22-24,54. |
| |
| Authors: | CHEN Ying AN Ping XIE Li-zhi ZHAO Jun-wen |
| |
| Affiliation: | 1.Huazhong University of Science and Technology ,Wuhan 430074,China;2.Jingmen Technical College,Jingmen 448002,China |
| |
| Abstract: | Considering the mould-filling characteristics of semi-solid slurry of aluminum alloy and avoiding the common defects of air entrapment, inclusion, short mould-filling, etc, a set of die-casting mould for rheomolding standard samples of aluminum alloy was designed. With the standard samples fabricated by this mould , the investigation on rheomolding process and the microstructure and mechanical properties of aluminum alloy could be conducted. |
| |
| Keywords: | aluminum alloy rheomolding standard samples die-casting mould |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
