|
|||||
|
|
| 轧制工艺对气瓶钢板示波冲击性能的影响 | |
| 引用本文： | 宋立秋,唐历,王义成,陈素坤,刘建华,李青春.轧制工艺对气瓶钢板示波冲击性能的影响[J].钢铁钒钛,2002,23(2):14-18. |
| 作者姓名： | 宋立秋 唐历 王义成 陈素坤 刘建华 李青春 |
| 作者单位： | 1. 攀枝花钢铁研究院,四川,攀枝花,617000 2. 攀钢科技处,四川,攀枝花,617067 3. 攀钢提钒炼钢厂,四川,攀枝花,617062 |
| 摘 要： | 应用示波冲击试验测量了不同终轧温度下HP295钢板在系列温度下的冲击韧性，测量了冲击断口试样的横向扩张量，利用扫描电镜分析了示波冲击断口形貌，结果表明，终轧温度提高，钢的韧脆转变温度提高，钢的冲击韧性下降，裂纹扩展功下降，示波冲击温度越低，终轧温度对韧性的影响越显著，冲击韧性与冲击断口的横向扩张量和断口的形貌具有较好的对应关系。 |
| 关 键 词： | 轧制工艺 气瓶钢板 示波冲击 性能 冲击韧性 断口形貌 温度 |
| 文章编号： | 1004-7638(2002)02-0014-05 |
| 修稿时间： | 2001年12月29 |
EFFECT OF ROLLING PROCESS ON INSTRUMENTED IMPACT PROPERTIES OF HP295 STEEL PLATE |
|
| SONG Li-qiu ,TANG Li ,WANG Yi-cheng ,CHEN Su-kun ,LIU Jian-hua ,LI Qing-chun BHDWGmm,WK,WKZQ,WKW.EFFECT OF ROLLING PROCESS ON INSTRUMENTED IMPACT PROPERTIES OF HP295 STEEL PLATE[J].Iron Steel Vanadium Titanium,2002,23(2):14-18. | |
| Authors: | SONG Li-qiu TANG Li WANG Yi-cheng CHEN Su-kun LIU Jian-hua LI Qing-chun [BHDWGmm WK WKZQ WKW] |
| Affiliation: | SONG Li-qiu 1,TANG Li 1,WANG Yi-cheng 1,CHEN Su-kun 2,LIU Jian-hua 2,LI Qing-chun 3[BHDWG13mm,WK2,WK42ZQ0,WK2W] |
| Abstract: | Impact toughness of HP295 steel plate were investigated at different finishing temperature and test temperature by means of instrumented impact test . LME of impact fracture were measured. Fractography of instrumented impact were analyzed by SEM. The results show that the temperature of ductile-to-brittle rise,impact toughness and crack propagation absorbed impact energy decrease along with finishing temperature rising.The lower instrumented temperature is,the greater effect of finishing temperature on toughness.There is good relation between impact toughness and LME of fracture with topography of fracture surfaces. |
| Keywords: | cylinder steel instrumented impact impact toughness fractography temperature |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |