| 区块整体调剖调剖剂用量优化技术研究 |
| |
| 引用本文： | 白宝君,高玉军.区块整体调剖调剖剂用量优化技术研究[J].断块油气田,1999,6(6):33-35,39. |
| |
| 作者姓名： | 白宝君 高玉军 |
| |
| 作者单位： | [1]中国石油天然气集团公司石油勘探开发科学研究院 [2]辽河石油勘探局 |
| |
| 基金项目： | 石油天然气集团公司“九五”科技攻关项目!“区块整体堵水调剖单元筛选” |
| |
| 摘 要： | 为满足油田现场对区块整体调剖优化设计的需要，研究了一套简单、快速的调剖剂用量优化设计方法。该方法以井组数值模拟为基础建立调剖剂用量优选模型，调剖剂用量的多少主要考虑调剖目的、渗透率变异系数、油井含水、采出程度、油层厚度、注水井日注水量、区块相对渗透率曲线、原油粘度、Ｋｖ／Ｋｈ和调剖剂的残余阻力系数等影响调剖效果的主要因素，采用该技术对辽河油田锦１６块第三层系进行了整体调剖优化设计取得了较好的增洞降
|
| 关 键 词： | 整体调剖 调剖剂用量 优化设计 油田 注水井 |
The Optimization of Profile Control Agent Volume Technique for Block-Intergral Injection Profile Control |
| |
| Bai Baojun and Li Yuxiang,Gao Yujun.The Optimization of Profile Control Agent Volume Technique for Block-Intergral Injection Profile Control[J].Fault-Block Oil & Gas Field,1999,6(6):33-35,39. |
| |
| Authors: | Bai Baojun and Li Yuxiang Gao Yujun |
| |
| Abstract: | To satisfy the need for block-wide injection profile control, this paper develops a set of simple,fast optimizing method of profile control agent volume. Optimism model is based on well group numerical simulation. The main factors influencing the agent volume are considered, including the destination of profile control, variable factors of permeability, water cut of production well, recovery, formation thickness, water injection volume,oil and water relative permeaility curve, oil viscosity, Kv/Kh and Frr. This technology was applied in Block Jin 16, Liaohe oilfield. After operation of this technique in the field, the oil rate is increased; water rate is reduced and oil recovery is improved. |
| |
| Keywords: | Intergral profile control Profile control agent Volume Optimizing design |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
