首页 | 本学科首页   官方微博 | 高级检索  
     

金属氧化物避雷器阻性泄漏电流无线检测方法的设计
引用本文:张金波,范梅荣,王俊,李威.金属氧化物避雷器阻性泄漏电流无线检测方法的设计[J].高压电器,2006,42(1):1-3,7.
作者姓名:张金波  范梅荣  王俊  李威
作者单位:河海大学计算机及信息工程学院,江苏 常州 213022;河海大学电气工程学院,江苏 南京 21009;河海大学计算机及信息工程学院,江苏 常州 213022
基金项目:河海大学常州校区科技创新基金资助项目(04B002-02) 常州市科技攻关资助项目(CE20040431)
摘    要:提出了一种测量金属氧化物避雷器阻性泄漏电流无线检测的新方法,该方法包括发送和接收两个装置。发送装置利用无线电理论,采集电网电压相位信号,并通过相应的电路将电网电压相位信号转换成脉冲信号进行调制后发送至接收装置。接收装置将接收到的电网电压相位脉冲信号进行解调后,与接收装置本身采集的避雷器全泄漏电流相位脉冲信号进行实时比较,得出电网电压和避雷器全泄漏电流的相位差,最后通过计算得出全泄漏电流的阻性电流分量,从而判断避雷器的性能。

关 键 词:MOA  阻性  相位检测  泄漏电流
文章编号:1001-1609(2006)01-0001-03
收稿时间:2005-07-18
修稿时间:2005-07-182005-08-16

Design of Resistance Leakage Current Wireless Measurement of Metal-oxide Surge Arrester
ZHANG Jin-bo,FAN Mei-rong,WANG Jun,LI Wei.Design of Resistance Leakage Current Wireless Measurement of Metal-oxide Surge Arrester[J].High Voltage Apparatus,2006,42(1):1-3,7.
Authors:ZHANG Jin-bo  FAN Mei-rong  WANG Jun  LI Wei
Abstract:This paper suggests a new method to measure the resistance leakage current wirelessly for metal-oxide surge arrester. The method has two devices, transmitting module and receiving module. The radio theory is adopted to collect the voltage phase information and to change it in-to pulse signal with certain circuit. The transmit device modulates the signal with phase information and sends it to the RF receive device by radio. The pulse signal of phase is demodulated by the RF receive device and compared with the phase of total leakage current of surge arrester. Phase differences between the network voltage and total leakage current of surge arrester are obtained. Then, the value of resistance leakage current is calculated, and the state of MOA can be judged.
Keywords:MOA  resistance  phase detect  leakage current
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号