| 锰青铜表面激光熔覆镍基合金的微观组织 |
| |
| 引用本文： | 杨胶溪,左铁钏,王喜兵,陈虹.锰青铜表面激光熔覆镍基合金的微观组织[J].中国激光,2008,35(11):1766-1769. |
| |
| 作者姓名： | 杨胶溪 左铁钏 王喜兵 陈虹 |
| |
| 作者单位： | 北京工业大学激光工程研究院,北京,100022 |
| |
| 基金项目： | 国家重点基础研究发展计划(973计划) |
| |
| 摘 要： | 用Rofin-Sinar CW025 YAG激光设备,采用同步送粉的方式进行自熔性Ni-Cr-B-Si合金粉末的激光熔覆,获得了无气孔和裂纹缺陷的熔覆层.借助扫描电子显微镜(SEM,LEO 1450)、能谱仪(EDS),X射线衍射(XRD)对激光熔覆层进行组织、成分及物相分析.研究结果表明,激光熔覆层与C86300铜合金基体实现了良好的冶金结合,激光熔覆层组织主要是γNi,Cr7C3,Ni2B,Ni3B以及少量CrB2和Cr3Si,并且实现了主要元素(Cr,Fe,Ni,Cu和Zn)从基体到熔覆层的梯度分布.
|
| 关 键 词： | 激光技术 激光熔覆 微观组织 锰青铜 镍基合金 |
| 收稿时间： | 2008/1/15 |
Microstructure of Laser Cladding Ni-Base Alloy on Manganese Bronze |
| |
| Yang Jiaoxi,Zuo Tiechuan,Wang Xibing,Chen Hong.Microstructure of Laser Cladding Ni-Base Alloy on Manganese Bronze[J].Chinese Journal of Lasers,2008,35(11):1766-1769. |
| |
| Authors: | Yang Jiaoxi Zuo Tiechuan Wang Xibing Chen Hong |
| |
| Abstract: | Wear-resistant coatings were fabricated by laser cladding with direct injection of the Ni-Cr-B-Si powder. Laser cladding was conducted with a Rofin-Sinar CW025 YAG laser. Laser cladding coatings were characterized by scanning electron microscopy (SEM, LEO1450), energy disperse spectroscopy (EDS) and X-ray diffraction (XRD). The results show that there is a good metallurgical bonding between the coating and the C86300 bronze substrate without pores and cracks. The laser cladding Ni-Cr-B-Si alloy coating was mainly γ-Ni, Cr7C3, Ni2B, Ni3B together with lesser proportions of CrB2 and Cr3Si. The basic elements (Cr, Fe, Ni, Cu and Zn) content from the bronze substrate to the coatings vary regularly. Near the interface, the main elements are gradient distributed. |
| |
| Keywords: | laser technique laser cladding microstructure manganese bronze Ni-base alloy |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
