| 高热强性热作模具钢SDH3的研究 |
| |
| 引用本文： | 佟倩,吴晓春,闵娜. 高热强性热作模具钢SDH3的研究[J]. 钢铁研究学报, 2010, 22(2): 46-46 |
| |
| 作者姓名： | 佟倩 吴晓春 闵娜 |
| |
| 作者单位： | 上海大学材料科学与工程学院,上海,200072 |
| |
| 基金项目： | 国家科技支撑计划资助项目(2007BAE51B04) |
| |
| 摘 要： | 根据热作模具钢的服役条件,基于成分均匀设计方法设计出一种高硅低钼型热作模具钢SDH3钢(专利钢),并与H13钢进行了室温冲击韧性、回火稳定性和热疲劳性能的对比试验研究,结果表明:热处理后,两种钢冲击韧性相当;620℃下保温22 h后,SDH3钢的硬度值大于35 HRC,比H13钢高4 HRC左右;SDH3钢具有比H13钢更优良的抗热疲劳性能。
|
| 关 键 词： | 热作模具钢 热疲劳 力学性能 回火稳定性 |
| 收稿时间： | 2009-01-12; |
Research on Hot-Working Die Steel SDH3 With High Hot-Strength |
| |
| TONG Qian,WU Xiao-chun,MIN Na. Research on Hot-Working Die Steel SDH3 With High Hot-Strength[J]. Journal of Iron and Steel Research, 2010, 22(2): 46-46 |
| |
| Authors: | TONG Qian WU Xiao-chun MIN Na |
| |
| Affiliation: | School of Materials Science and Engineering;Shanghai University;Shanghai 200072;China |
| |
| Abstract: | According to the service conditions of hot work die steels, SDH3 steel (patent steel) was designed in this paper based on uniform design method. Compared to H13 steel, the mechanical and thermal fatigue properties were studied. The results indicated that atfter heat treatment processes, there had a similar vertical impact tough-ness of the two steels, and the hardness of SDH3 steel tempered at 620℃ for 22 h remained over 35 HRC, which was about 4 HRC higher than H13; and that SDH3 steel had better thermal fatigue resistance than H13 steel. |
| |
| Keywords: | hot-working die steel thermal fatigue mechanical property resistance to tempering |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《钢铁研究学报》浏览原始摘要信息 |
|
点击此处可从《钢铁研究学报》下载全文 |
|
