Implant stability in revision total hip arthroplasty: allograft bone packing following extended proximal femoral osteotomy

One method of revising the femoral component in revision total hip arthroplasty in the presence of compromised femoral bone stock is to pack the upper femur with particulate allograft and then to cement the femoral component into the allograft bed. This technique is being used clinically with encouraging results. Additionally, surgical exposure of the femoral canal during revision total hip arthroplasty can be greatly improved with an extended trochanteric osteotomy, which is subsequently repaired with wires or cables. To assess the feasibility of performing the allograft bone packing technique following an extended trochanteric osteotomy, the stability of this construct in a cadaver model was measured, using micromotion sensing instruments and loads applied on a materials testing machine. The stability of the cemented allograft impaction construct following extended trochanteric osteotomy was comparable to the stability of the control construct, which consisted of a similar impacted allograft construct without osteotomy. The stability of the osteotomized side was comparable to that of the control side. It is concluded that the initial in vitro stability of the allograft impaction technique following extended proximal femoral osteotomy is adequate to justify experimental in vivo use.