首页 | 本学科首页   官方微博 | 高级检索  
     

高强度螺栓多工序成形计算机模拟
引用本文:岳峰丽,刘洋,刘劲松.高强度螺栓多工序成形计算机模拟[J].沈阳理工大学学报,2006,25(6):65-67.
作者姓名:岳峰丽  刘洋  刘劲松
作者单位:1. 沈阳理工大学,汽车与交通学院,辽宁,沈阳,110168
2. 盘锦市公路管理处
摘    要:针对高强度长螺栓平锻工艺过程,采用刚塑性有限元方法进行了模拟,研究了螺栓多工序成形过程的变形特点,对其中的应力场、速度场、成形工艺和成形特点进行了分析,建立了相应的数学模型并得出其计算结果.

关 键 词:高强度长螺栓  平锻  有限元模拟  金属成形
文章编号:1003-1251(2006)06-0065-03
收稿时间:2006-03-10
修稿时间:2006年3月10日

Computer Simulation of the Multistep Forming Processes for a High Strength Bolt
YUE Feng-li,LIU Yang,LIU Jin-song.Computer Simulation of the Multistep Forming Processes for a High Strength Bolt[J].Transactions of Shenyang Ligong University,2006,25(6):65-67.
Authors:YUE Feng-li  LIU Yang  LIU Jin-song
Affiliation:1. Shenyang Ligong University, Shenyang 110168 ,China; 2. Panjin Transortation Management Department
Abstract:The multistep forging process of a high strength long bolt is simulated by using rigid-plastic finite element method.The forming technology,characteristics,stress distribution and velocity distribution about the horizontal forging are analyzed.The mathematical model and its related result are presented in this paper.
Keywords:high strength long bolt  horizontal forging  finite element method  metal forming  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号