| 核电AP1000整锻低压转子的试制 |
| |
| 引用本文： | 曹志远,张海峰,季雪,高建军.核电AP1000整锻低压转子的试制[J].大型铸锻件,2011(4):8-11. |
| |
| 作者姓名： | 曹志远 张海峰 季雪 高建军 |
| |
| 作者单位： | 天津重型装备工程研究有限公司,天津,300457 |
| |
| 摘 要： | 利用150 MN水压机,使用580 t钢锭,采用两次镦粗三次拔长工艺,并将FM法作为钢锭压实的主要拔长方法成功试制了核电AP1000整锻低压转子,探伤结果未发现超标缺陷.
|
| 关 键 词： | 核电 低压转子 转子锻件 |
Trial-Manufacture of AP1000 LP Integral Rotor for Nuclear Power Plant |
| |
| Cao Zhiyuan,Zhang Haifeng,Ji Xue,Gao Jianjun.Trial-Manufacture of AP1000 LP Integral Rotor for Nuclear Power Plant[J].Heavy Casting and Forging,2011(4):8-11. |
| |
| Authors: | Cao Zhiyuan Zhang Haifeng Ji Xue Gao Jianjun |
| |
| Affiliation: | Cao Zhiyuan,Zhang Haifeng,Ji Xue,Gao Jianjun |
| |
| Abstract: | With 580 t ingot in 150 MN hydraulic press,adopting two times upsetting and three times FM drawing out technique,the nuclear AP1000 LP integral forged rotor has been produced successfully,and the examination results don't discover over-standard defects. |
| |
| Keywords: | nuclear power plant LP rotor rotor forging |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
