| 轴向柱塞泵实体建模中的变型研究 |
| |
| 引用本文： | 李玉龙,王学军. 轴向柱塞泵实体建模中的变型研究[J]. 组合机床与自动化加工技术, 2006, 0(8): 44-45,48 |
| |
| 作者姓名： | 李玉龙 王学军 |
| |
| 作者单位： | 1. 合肥学院,机械工程系,合肥,230011;合肥工业大学,机械与汽车工程学院,合肥,230009
2. 合肥学院,机械工程系,合肥,230011 |
| |
| 基金项目： | 安徽省教育厅自然科学基金;合肥学院校科研和教改项目 |
| |
| 摘 要： | 利用UGNX软件现有成熟的三维建模技术，结合轴向柱塞泵主体零件的结构特点，从零件和装配两层面，探讨了变型的原理和建模方法，重点是零件装配数目和零件结构的变型，为实现轴向柱塞泵三维模型的参数化打下基础。
|
| 关 键 词： | 轴向柱塞泵 实体建模 变型 参数化 |
| 文章编号： | 1001-2265（2006）08-0044-02 |
The Research of Form-changed Design in Three-dimensional (3D) Modeling of Axial Pulunger Pumps |
| |
| LI Yu-long,WANG Xue-jun. The Research of Form-changed Design in Three-dimensional (3D) Modeling of Axial Pulunger Pumps[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2006, 0(8): 44-45,48 |
| |
| Authors: | LI Yu-long WANG Xue-jun |
| |
| Affiliation: | 1. Department of Mechanical Engineering, Hefei University, Hefei 230011 ,China; 2. School of Mechanical and Automotive Engineering, Hefei University of Technology, Hefei 230009, China |
| |
| Abstract: | With the advanced three-dimensional modeling technical of UGNX software, and the main structure characteristics of axial plunger pumps, the thesis discussed the theories of form-changed design and the modeling methods from part level to assembly level, the emphases were form-changed design of part amount in assembly and part structure, which was the basis for really and truly retaliating parameterized modeling in formchanged design of axial plunger pumps. |
| |
| Keywords: | UGNX |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
