| 循环流化床锅炉省煤器受热而改造及防磨措施 |
| |
| 引用本文： | 沈晓兰 王林. 循环流化床锅炉省煤器受热而改造及防磨措施[J]. 中国电力, 2003, 36(10): 74-75 |
| |
| 作者姓名： | 沈晓兰 王林 |
| |
| 作者单位： | 大连金州热电有限公司,辽宁大连116100 |
| |
| 摘 要： | 针对大连金州热电有限公司2台UG-75/5．3-m3型循环流化床锅炉因尾部受热面磨损严重影响锅炉出力且保证不了锅炉连续稳定运行问题，对防磨问题进行了深入研究．对UC-75／5.3m3型锅炉尾部受热面改造及防磨问题进行阐述，提出可行性方案予以实施。改造后，锅炉可连续稳定运行并达到额定出力。
|
| 关 键 词： | 循环流化床锅炉 省煤器 受热面 技术改造 防磨措施 |
| 文章编号： | 1004-9649(2003)10-0074-02 |
| 修稿时间： | 2003-02-25 |
Retrofitting and antiwear measures of economizer heating surface of circulating fluidized bed combustion (CFBC) boiler |
| |
| SHEN Xiao-Ian,WANG Lin. Retrofitting and antiwear measures of economizer heating surface of circulating fluidized bed combustion (CFBC) boiler[J]. Electric Power, 2003, 36(10): 74-75 |
| |
| Authors: | SHEN Xiao-Ian WANG Lin |
| |
| Abstract: | Serious wearing problems existed on the tail-heating surfaces of two UG-75/5.3-m3 type circulating fluidized bed combustion (CFBC) boilers in Dalian Jinzhou Cogeneration Power Company Ltd., which affected the output and stable operation of boilers. In view of these problems, the retrofitting scheme and antiwear measures of tail-heating surfaces of UG-75/5.3-m3 boilers were thoroughly studied. The feasible retrofitting scheme was put forward and fulfilled. After retrofitting, the boilers have been able to operate stable and continuously at full load. |
| |
| Keywords: | circulating fluidized bed combustion boiler wear economizer retrofit |
| 本文献已被 CNKI 维普 等数据库收录！ |
