首页 | 本学科首页   官方微博 | 高级检索  
     

聚丙烯/BA原位聚合改性MMT纳米复合材料的DSC分析与力学性能
引用本文:张敬武,谭菁,周兴平,解孝林. 聚丙烯/BA原位聚合改性MMT纳米复合材料的DSC分析与力学性能[J]. 塑料工业, 2003, 31(6): 15-16
作者姓名:张敬武  谭菁  周兴平  解孝林
作者单位:1. 中国石化股份有限公司武汉分公司,湖北,武汉,430082
2. 华中科技大学化学系,湖北,武汉,430074
基金项目:国家自然科学基金项目 (5 0 0 0 3 0 0 5 )和 (10 172 0 3 7)资助
摘    要:通过原位聚合制备了聚丙烯酸丁酯 (PBA )改性蒙脱土 (MMT ) ,与聚丙烯 (PP)熔融复合制成PP/MMT纳米复合材料 ,系统地研究了复合材料的熔融、结晶行为和力学性能。结果表明 :随着处理MMT的BA用量的增加 ,PP/MMT纳米复合材料中PP相的结晶度、熔点和结晶温度明显提高 ,结晶速度加快 ;复合材料的拉伸强度变化不大 ,但拉伸模量和冲击强度有显著提高。当BA/OMMT质量比为 1/ 12左右时 ,复合材料的韧性趋于平衡值 ,而拉伸模量出现最大值

关 键 词:PP/MMT纳米复合材料  聚丙烯酸丁酯  蒙脱土  聚丙烯
文章编号:1005-5770(2003)06-0015-02
修稿时间:2002-12-12

DSC Analysis and Mechanical Properties of Polypropylene-matrix Nano-composites Filled with Montmorillonite Modified by in-situ Polymerization of Butyl Acrylate
ZHANG Jing wu ,TAN Jing ,ZHOU Xing ping ,XIE Xiao lin. DSC Analysis and Mechanical Properties of Polypropylene-matrix Nano-composites Filled with Montmorillonite Modified by in-situ Polymerization of Butyl Acrylate[J]. China Plastics Industry, 2003, 31(6): 15-16
Authors:ZHANG Jing wu   TAN Jing   ZHOU Xing ping   XIE Xiao lin
Affiliation:ZHANG Jing wu 1,TAN Jing 1,ZHOU Xing ping 2,XIE Xiao lin 2
Abstract:Polypropylene (PP)/ montmorillonite (MMT) nano composites were prepared by mechanical melting blending, in which MMT was modified by in situ polymerization of butyl acrylate (BA) The T m, T c, X c and crystallization rate of PP phase in the composites all increased with the increase of the content of BA and MMT Moreover, the modulus and impact strength of the PP/MMT nano composite also increased with the content of BA and MMT, whilst the tensile strength of the composite changed little When the mass fraction ratio of BA/MMT was up to 1/12, the toughness tended to a constant value, and the modulus of the nano composite was the highest
Keywords:PP/montmorillonite Nano composites  Melting  Crystallization  Mechanical Properties  PBA  Montmorillonite  PP
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号