| 全钢载重子午线轮胎带束层帘线受力的有限元分析 |
| |
| 引用本文： | 徐立,阙元元,耿新亭,李福军.全钢载重子午线轮胎带束层帘线受力的有限元分析[J].轮胎工业,2008,28(3):144-147. |
| |
| 作者姓名： | 徐立 阙元元 耿新亭 李福军 |
| |
| 作者单位： | 北京橡胶工业研究设计院,北京,100143;北京橡胶工业研究设计院,北京,100143;北京橡胶工业研究设计院,北京,100143;北京橡胶工业研究设计院,北京,100143 |
| |
| 摘 要： | 建立11.00R20规格全钢载重子午线轮胎结构力学分析的二维和三维有限元模型,模型考虑了轮胎分析中因大变形而产生的几何非线性和材料非线性问题及轮胎与轮辋和路面的接触问题.采用ABAQUS软件对轮胎模型的装配与充气过程和轮胎在静负荷条件下带束层帘线的受力情况进行了分析,得到的各层带束层受力结果可帮助轮胎结构工程师评价带束层的设计方案.
|
| 关 键 词： | 全钢载重子午线轮胎 带束层有限元分析 三维有限元模型 |
| 文章编号： | 1006-8171（2008）03-0144-04 |
Finite element analysis of the forces in the belts of TBR tire |
| |
| XU Li,QUE Yuan-yuan,GENG Xin-ting and LI Fu-jun.Finite element analysis of the forces in the belts of TBR tire[J].Tire Industry,2008,28(3):144-147. |
| |
| Authors: | XU Li QUE Yuan-yuan GENG Xin-ting and LI Fu-jun |
| |
| Affiliation: | Beijing Research and Design Institute of Rubber Industry,Beijing Research and Design Institute of Rubber Industry,Beijing Research and Design Institute of Rubber Industry and Beijing Research and Design Institute of Rubber Industry |
| |
| Abstract: | The 2D and 3D FE models were presented for the structure mechanics analysis of 11.00R20 TBR tire,taking account of material and geometry nonlinearities due to large deformations,as well as the contacts between tire and rim,tire and road surface.ABAQUS software was used to simulate the force distribution in the belts during tire mounting,tire inflating,and when the tire was under static load.The results obtained from above FE analysis can aid engineers to optimize tire designs. |
| |
| Keywords: | TBR tire finite element analysis 3D finite element model |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《轮胎工业》浏览原始摘要信息 |
|
点击此处可从《轮胎工业》下载全文 |
