| 基于Matlab/Simulink数控伺服系统的建模仿真 |
| |
| 引用本文： | 王小东,王大承.基于Matlab/Simulink数控伺服系统的建模仿真[J].组合机床与自动化加工技术,2006(8):67-69. |
| |
| 作者姓名： | 王小东 王大承 |
| |
| 作者单位： | 五邑大学,机电工程系,广东,江门,529020 |
| |
| 基金项目： | 广东省博士启动基金;广东省高教厅科研项目 |
| |
| 摘 要： | 利用Matlab／Simulink软件，通过对永磁同步电机（PMSM）本体、d／q坐标系向a／b／c坐标系转换、三相电流源逆变器等功能模块建立与组合，构建了永磁同步电机控制系统的速度和电流双闭环仿真模型。根据数控伺服系统的性能要求，进行参数选择及仿真。仿真结果证明了该系统模型的有效性，为数控伺服控制系统的设计和调试提供了理论基础。
|
| 关 键 词： | 数控伺服系统 永磁同步电机 仿真 |
| 文章编号： | 1001-2265(2006)08-0067-03 |
| 收稿时间： | 2006-02-27 |
| 修稿时间： | 2006年2月27日 |
Simulation and Modeling of PMSM Based on Matlab |
| |
| WANG Xiao-dong,WANG Da-cheng.Simulation and Modeling of PMSM Based on Matlab[J].Modular Machine Tool & Automatic Manufacturing Technique,2006(8):67-69. |
| |
| Authors: | WANG Xiao-dong WANG Da-cheng |
| |
| Affiliation: | Department of Mechanical and Electrical Engineering, Wuyi University, Jiangmen Guangdong 529020, China |
| |
| Abstract: | In Matlab/Simulink, the blocks, such as PMSM block, coordinate transformation formed q/d to a/b/c block, three phase current source inveter controller block, etc. have been modeled. By the organic combination of these blocks, two control loops are used. The parameters are chosed by the performance of servo system. The reasonability and validity have been testified by simulate result and this novel method offers a new thought for designing and debugging actual motor. |
| |
| Keywords: | Matlab/Simulink |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
