Ni/La2O3 catalysts for dry reforming of methane: Effect of La2O3 synthesis conditions on the structural properties and catalytic performances

10 wt%Ni/La₂O₃ catalysts for dry reforming of methane (DRM) were synthesized by wetness impregnation of lanthana supports prepared using sol-gel citric method with and without NH₃ addition (Ni–La CA-NH₃ and Ni–La CA, respectively). The support preparation conditions affect the nature, phase composition, and distribution of Ni phases (LaNiO₃, NiO and La₃Ni₂O₆). The gradient temperature DRM tests (400–800 °C) reveal higher catalytic activity of Ni–La CA (at 650 °C, X(CO₂) = 65.7%, X(CH₄) = 54.6%, H₂/CO = 0.71). The Ni–La CA-NH₃ shows higher stability (at 650 °C and 24 h, X(CO₂): 73.7% => 76.4%, X(CH₄): 64.7% => 64.6%, H₂/CO: 0.77 => 0.72). For both catalysts, La₂O₂CO₃ phase is formed after long run tests at 650 °C 24 h, with the greater TGA weight loss and stronger deactivation being observed for Ni–La CA. The H₂-reduced Ni La CA-NH₃ features ultrasmall (1–2 nm) Ni NPs strongly interacting with the support. Catalyst nature affects the amount of carbon coke formed.