Experimental and theoretical analysis of a natural gas fuel processor

In this study, a natural gas fuel processor was experimentally and theoretically investigated. The constructed 2.0 kWth fuel processor is suitable for a residential-scale high temperature proton exchange membrane fuel cell. The system consists of an autothermal reformer; gas clean-up units, namely high and low-temperature water-gas shift reactors; and utilities including feeding unit, burner, evaporator and heat exchangers. Commercial monolith catalysts were used in the reactors. The simulation was carried out by using ASPEN HYSYS program. A validated kinetic model and adiabatic equilibrium model were both presented and compared with experimental data. The nominal operating conditions which were determined by the kinetic model were the steam-to-carbon ratio of 3.0, the oxygen-to-carbon ratio of 0.5 and the inlet temperatures of 450 °C for autothermal reformer, 400 °C for high-temperature water-gas shift reactor and 310 °C for low-temperature water-gas shift reactor. Experimental results at the nominal condition showed that the performance criteria of the hydrogen yield, the fuel conversion and the efficiency were 2.53, 93.5% and 82.3% (higher heating value-HHV), respectively. The validated kinetic model was further used for the determination of 2–10kWthermal fuel processor efficiency which was increasing linearly up-to 86.3% (HHV).