| Pro/E在新型并联机床实体建模上的应用 |
| |
| 引用本文： | 姜媛媛.Pro/E在新型并联机床实体建模上的应用[J].辽宁石油化工大学学报,2009,29(4). |
| |
| 作者姓名： | 姜媛媛 |
| |
| 作者单位： | 辽宁石油化工大学机械工程学院,辽宁抚顺,113001 |
| |
| 基金项目： | 辽宁省教育厅科学研究计划 |
| |
| 摘 要： | 采用Pro/E对3_TPS_RRR并联机床进行虚拟样机实体建模,并分析该机床机构。利用Pro/E软件对该并联机床进行了特征建模,设计出伸缩杆、驱动杆、动平台、静平台、虎克铰及双十字轴的结构。结合Pro/E的机构约束条件对3_TPS_RRR型并联机床进行模拟装配,从而得到虚拟样机实体模型。通过Pro/E设计出的虚拟样机缩短了机床设计和制造周期,提高了生产效率。
|
| 关 键 词： | 并联机床 Pro/E 实体建模 虚拟样机 |
Application of Pro/E in the New Entity Modeling on Parallel Machine Tools |
| |
| JIANG Yuan-yuan.Application of Pro/E in the New Entity Modeling on Parallel Machine Tools[J].Journal of Liaoning University of Petroleum & Chemical Technology,2009,29(4). |
| |
| Authors: | JIANG Yuan-yuan |
| |
| Affiliation: | JIANG Yuan-yuan(School of Mechanical Engineering,Liaoning University of Petroleum & Chemical Technology,Fushun Liaoning 113001,P.R.China) |
| |
| Abstract: | 3_TPS_RRR virtual parallel machine prototype solid modeling was made and machine body were analyzed using Pro/E.The entity modeling on the three characteristics of a parallel machine tool modeling was established using Pro/E.The structure including hooker hinge,moving platform,static platform,scalable flu,the drive-structure and double-cross were designed.At last,used Pro/E body constraints to simulate 3_TPS_RRRs assembly and then get the virtual prototype solid model.Virtual prototype designed by Pro/E can cut design and manufacturing cycles,increasing productivity. |
| |
| Keywords: | Pro/E |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
