| 基于SolidWorks的自顶向下装配与参数化技术 |
| |
| 引用本文： | 水俊峰,吴宗佳,陈树晓,吴淑芳,王宗彦.基于SolidWorks的自顶向下装配与参数化技术[J].机械工程与自动化,2007(5):9-11. |
| |
| 作者姓名： | 水俊峰 吴宗佳 陈树晓 吴淑芳 王宗彦 |
| |
| 作者单位： | 1. 中北大学,机械工程与自动化学院,山西,太原,030051
2. 海军91550部队240所一室,辽宁,大连,116023 |
| |
| 基金项目： | 国家高技术研究发展计划(863计划) |
| |
| 摘 要： | 介绍了在SolidWorks中自顶向下的装配设计过程和实施方法,提出以“顶层基本骨架”作为自顶向下设计时信息传递的桥梁,并以具体实例实现了装配过程和参数化设计。
|
| 关 键 词： | 自顶向下 参数化技术 装配 |
| 文章编号： | 1672-6413（2007）05-0009-03 |
| 修稿时间： | 2007-01-122007-04-21 |
Research on Top-down Assembly and Parametric Technology Based on SolidWorks |
| |
| SHUI Jun-feng,WU Zong-jia,CHEN Shu-xiao,WU Shu-fang,WANG Zong-yan.Research on Top-down Assembly and Parametric Technology Based on SolidWorks[J].Mechanical Engineering & Automation,2007(5):9-11. |
| |
| Authors: | SHUI Jun-feng WU Zong-jia CHEN Shu-xiao WU Shu-fang WANG Zong-yan |
| |
| Abstract: | This paper introduced the process and method of top-down assembly design in SolidWorks,put forward the theory that a "top basic skeleton" is the information delivering bridge in top-down design.With a specific example,the paper described the assembly design process following this theory and the parameter-driven designing system based on the assembly model. |
| |
| Keywords: | top-down parametric technology assembly |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
