首页 | 本学科首页   官方微博 | 高级检索  
     

基于PCI总线的FPGA配置系统的设计
引用本文:梅安华,田建生,刘欢,聂鑫,程宁. 基于PCI总线的FPGA配置系统的设计[J]. 计算机测量与控制, 2005, 13(4): 375-378
作者姓名:梅安华  田建生  刘欢  聂鑫  程宁
作者单位:武汉大学,电子信息学院,湖北,武汉,430079;武汉大学,电子信息学院,湖北,武汉,430079;武汉大学,电子信息学院,湖北,武汉,430079;武汉大学,电子信息学院,湖北,武汉,430079;武汉大学,电子信息学院,湖北,武汉,430079
基金项目:国家“十五”计划资助项目(2001AA631050)。
摘    要:在对FPGA配置比特流文件进行结构分析的基础上,通过系统PCI总线利用Select MAP配置模式实现了对FPGA数据进行在线配置系统的设计,解决了传统数据加载方法中需要加载电缆的限制,完成了对FPGA芯片程序加载过程的完全软件化操作.使得整个系统的配置、调试能够同步进行。实验测试表明,系统工作正常,证明系统原理与硬件设计是成功的。

关 键 词:软件无线电  现场可编程门阵列  PCI总线  配置
文章编号:1671-4598(2005)04-0375-03
修稿时间:2004-05-28

Design of Configuring FPGA System Based on PCI Bus
Mei Anhua,Tian Jiansheng,Liu Huan,Nie Xin,Cheng Ning. Design of Configuring FPGA System Based on PCI Bus[J]. Computer Measurement & Control, 2005, 13(4): 375-378
Authors:Mei Anhua  Tian Jiansheng  Liu Huan  Nie Xin  Cheng Ning
Abstract:Based on the structural analysis of FPGA configuration bit-stream document, a flexible method is presented to realize the design of online configuring FPGA in SelectMAP mode. The restriction that the special cable was required by the traditional data-loading methods is relieved. It also accomplishes the complete software-based manipulation when loading FPGA programs. The synchronization of configuring and debugging system is also successfully achieved. The test result indicates that the system works normally and the system principle and hardware design are successful.
Keywords:software radio  FPGA  PCI Bus  configuration
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号