| 轴心受压钢骨-钢管高强混凝土组合柱承载力的研究 |
| |
| 引用本文： | 王清湘, 赵大洲, 关萍. 轴心受压钢骨-钢管高强混凝土组合柱承载力的研究[J]. 工程力学, 2003, 20(6): 195-201. |
| |
| 作者姓名： | 王清湘 赵大洲 关萍 |
| |
| 作者单位： | 1.大连理工大学海岸和近海工程国家重点实验室, 大连, 116024;2. 大连大学土木建筑工程系, 大连, 116622 |
| |
| 基金项目： | 国家自然科学基金资助项目(50078008) |
| |
| 摘 要： | 提出了一种重载柱设计的新模式,即钢骨-钢管混凝土组合柱。该组合柱是在钢管混凝土内埋设钢骨。通过13根具有不同套箍指标、配骨指标和长细比的组合柱的轴心受压试验,研究了其受力性能。研究结果表明,由于钢管、钢骨和混凝土的协同工作,可有效地提高柱子的承载力,延缓或抑制混凝土中剪切斜裂缝的开展,提高柱子的延性。组合柱的承载力和延性将随着长细比的增大而下降。基于试验研究结果,建立了轴压组合柱承载力数值计算模型,数值计算结果与试验结果吻合良好。
|
| 关 键 词： | 组合柱 承载力 数值计算 高强混凝土 长细比 |
| 文章编号： | 1000-4750(2003)06-0195-07 |
| 收稿时间： | 2002-07-15 |
| 修稿时间： | 2002-12-08 |
THE LOAD-BEARING CAPACITY OF AXIALLY LOADED CIRCULAR STEEL TUBULAR COLUMNS FILLED WITH STEEL-REINFORCED HIGH-STRENGTH CONCRETE |
| |
| WANG Qing-xiang, ZHAO Da-zhou, GUAN Ping. THE LOAD-BEARING CAPACITY OF AXIALLY LOADED CIRCULAR STEEL TUBULAR COLUMNS FILLED WITH STEEL-REINFORCED HIGH-STRENGTH CONCRETE[J]. Engineering Mechanics, 2003, 20(6): 195-201. |
| |
| Authors: | WANG Qing-xiang ZHAO Da-zhou GUAN Ping |
| |
| Affiliation: | 1.State Key Laboratory of Coastal and Offshore Engineering, Dalian University of Technology, Dalian 116024, China;2. Department of Civil Engineering, Dalian University, Dalian 116622, China |
| |
| Abstract: | A new design model for column subjected to heavy loads is presented in this paper. This kind of column is formed by inserting steel section into concrete-filled steel tube, and is called circular steel tubular column filled with steel-reinforced concrete. A total of 13 axially loaded composite columns with various combinations of confinement index, structural steel index and slenderness ratio were tested. The mechanical behavior of the composite column is studied. Results show that the load-bearing capacity and ductility of the composite column are improved, and the propagation of cracks in concrete is mitigated or arrested effectively as concrete and steel work together. With the increase of slenderness ratio, the load-bearing capacity and ductility of the composite column decrease. Based on the test results, a numerical model for predicting the load-bearing capacity of the composite columns under axial load is developed. The calculated results are in good agreement with the test data. |
| |
| Keywords: | composite column load-bearing capacity numerical calculation high-strength concrete slenderness ratio |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《工程力学》浏览原始摘要信息 |
|
点击此处可从《工程力学》下载全文 |
|
