| 方坯连铸机切割系统电气自动控制改造 |
| |
| 引用本文： | 彭凉,李志平. 方坯连铸机切割系统电气自动控制改造[J]. 江西冶金, 2007, 27(1): 29-31 |
| |
| 作者姓名： | 彭凉 李志平 |
| |
| 作者单位： | 新余钢铁有限责任公司,江西,新余,338001 |
| |
| 摘 要： | 针对新钢公司炼钢厂方坯连铸机自动定尺火焰切割机系统在生产过程中出现的故障和问题,利用现有连铸拉矫机上的铸坯跟踪编码器和切割自动控制PLC程序进行了技术改造.通过由编码器产生的数据模拟产生切割机的位置定尺信号来取代原来的传感器信号,从而有效地解决了因高温区电缆及信号传感器寿命短,故障率高而影响生产的问题.
|
| 关 键 词： | 方坯连铸机 火焰切割机 PLC 增量型编码器 高数计数模块 方坯连铸机 切割系统 电气 自动控制 控制改造 Machine Continuous Billet Transformation System Electronic Cutter Analysis 生产过程 影响 故障率 寿命短 信号传感器 电缆 高温区 |
| 文章编号： | 1006-2777（2007）01-0029-03 |
| 修稿时间： | 2006-07-06 |
Plain Analysis of Cutter Electronic Auto-control System Transformation on Billet Continuous Machine |
| |
| PENG Liang,LI Zhi-ping. Plain Analysis of Cutter Electronic Auto-control System Transformation on Billet Continuous Machine[J]. Jiangxi Metalllurgy, 2007, 27(1): 29-31 |
| |
| Authors: | PENG Liang LI Zhi-ping |
| |
| Affiliation: | Xinyu Iron and Steel Co. ,Ltd. ,Jiangxi Xinyu 338001 ,China |
| |
| Abstract: | Aimed at the appeared problem and malfunction in production process on automatic size-setted torch-cutter system in billet continuous machine in our factory, The transformation is carried out through utilizing the existing billet-track eneoder and PLC program of auto-eortrol cut, With the aid of billet position signal simulation data produced by encodar,It effectly solved problems of high malfunction rate due to the short-life of cable and sensor in high-temperature zone |
| |
| Keywords: | billet continuous machine torch-cutter machine PLC increase-type encoder high-speed counter module |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
