| 基于PC控制的数控车削精加工对刀谬误修正 |
| |
| 引用本文： | 周建来,张建国,朱建忠,唐学飞.基于PC控制的数控车削精加工对刀谬误修正[J].制造技术与机床,2002(11):50-51. |
| |
| 作者姓名： | 周建来 张建国 朱建忠 唐学飞 |
| |
| 作者单位： | 1. 江苏连云港化工高等专科学校
2. 江苏连云港市纺织机械厂 |
| |
| 摘 要： | 数控加工前，必须进行对刀。精加工的对刀要求十分严格，各项影响刀具与工件相对位置关系的因素都要考虑清楚。文章着重分析了对刀中普遍存在的两种不恰当做法，对数控精加工有着重要的意义。
|
| 关 键 词： | 数控车削 精加工 对刀 廖误修正 |
| 修稿时间： | 2001年5月24日 |
Correcting the Tool-setting Error for Precision PC-based NC Turning |
| |
| ZHOU Jianlai.Correcting the Tool-setting Error for Precision PC-based NC Turning[J].Manufacturing Technology & Machine Tool,2002(11):50-51. |
| |
| Authors: | ZHOU Jianlai |
| |
| Affiliation: | Jiangsu Lianyungang Senior Chemical Training School |
| |
| Abstract: | Before NC machining, one must set tool(s). For precision machining, it has a very strict requirement on tool setting, and one must take full consideration all factors influencing the relative position relationship between tool and workpiece. The paper emphatically analyzes two incorrect ways in setting tools frequently occur, this is very important for NC precision machining. |
| |
| Keywords: | NC Turning Precision Machining Tool Setting Error Correction |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
