| 基于油液检测的柴油机台架磨合过程研究 |
| |
| 引用本文： | 魏海军,孙培廷,尹峰,胡庆存. 基于油液检测的柴油机台架磨合过程研究[J]. 内燃机学报, 2005, 23(1): 88-91 |
| |
| 作者姓名： | 魏海军 孙培廷 尹峰 胡庆存 |
| |
| 作者单位： | 大连海事大学,轮机工程学院,辽宁,大连,116026;河北交通职业技术学院,天津校区,天津,300381 |
| |
| 摘 要： | 利用油液检测技术，应用表面粗糙度分析仪和结合使用不同的磨合油，对某型柴油机磨合过程进行综合研究。试验结果表明使用专用磨合油能有效改善摩擦副表面性能，台架磨合与摩擦副的原始表面粗糙度关系不大，利用润滑油分析技术和其他磨合技术，不但可以降低磨合过程的故障率，提高磨合质量，而且可以将该机型的磨合时间由45min缩短到25-30min，提高生产效率，降低生产成本。
|
| 关 键 词： | 磨合 油液检测 光谱分析 磨合油 柴油机 |
| 文章编号： | 1000-0909(2005)01-0088-04 |
| 修稿时间： | 2004-06-21 |
A Study on Running-in Process of Diesel Engine Based on Oil Monitoring in Diesel Engine |
| |
| WEI Hai-jun,SUN Pei-ting,YIN Feng,HU Qing-cun. A Study on Running-in Process of Diesel Engine Based on Oil Monitoring in Diesel Engine[J]. Transactions of Csice, 2005, 23(1): 88-91 |
| |
| Authors: | WEI Hai-jun SUN Pei-ting YIN Feng HU Qing-cun |
| |
| Affiliation: | WEI Hai-jun~1,SUN Pei-ting~1,YIN Feng~1,HU Qing-cun~2 |
| |
| Abstract: | The running-in process of diesel engine using oil and lubricant analysing technology and surface roughness tester was investigated.The results show that the wearing property can be improved by using a special running-in oil and no obvious relationship is found between the running-in quality and the initial surface roughness.Duration of diesel engine running-in is shortened from 45 min to less than 30 min,and the failure occurring ratio falls obviously by using the special running-in oil. |
| |
| Keywords: | Running-in Oil monitoring technology Spectrometric analysis Running-in oil Diesel engine |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
