| 汽车卡口小零件注射模设计 |
| |
| 引用本文： | 管永刚,杨丹. 汽车卡口小零件注射模设计[J]. 模具制造, 2007, 7(9): 51-52 |
| |
| 作者姓名： | 管永刚 杨丹 |
| |
| 作者单位： | 淮阴工学院,江苏淮安,223003;淮阴工学院,江苏淮安,223003 |
| |
| 摘 要： | 设计一款适用于汽车上具有卡口式零件的注射模.采用单一分型面、侧抽芯方法,符合制造精度的要求,同时采用了镶件组合模式,提高了模具使用寿命,降低了模具成本,对同类制品具有一定的参考价值.
|
| 关 键 词： | 模具设计 卡口结构 侧抽芯 型腔 |
Design of Injection Mold for the Bayonet Parts of Automobile |
| |
| Guan Yonggang. Design of Injection Mold for the Bayonet Parts of Automobile[J]. Die & Mould Manufacture, 2007, 7(9): 51-52 |
| |
| Authors: | Guan Yonggang |
| |
| Abstract: | An injection mold for the bayonet parts of automobile was designed, using single parting surface and side core-pulling, it satisfied the required of precision manufacturing. Meanwhile it used the mixed mode of panel board which improved the life of mold and reduced the cost of the mold, it had a certain reference to similar products. |
| |
| Keywords: | mold design bayonet structure side core-pulling cavity |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
