Electrophoretic deposition of carbon nanotubes onto carbon-fiber fabric for production of carbon/epoxy composites with improved mechanical properties |
| |
| Authors: | Qi An Andrew N Rider Erik T Thostenson |
| |
| Affiliation: | 1. Center for Composite Materials, University of Delaware, Newark, DE 19716, USA;2. Air Vehicles Division, Defence Science and Technology Organization, Fisherman’s Bend, Victoria 3207, Australia;3. Department of Materials Science and Engineering, University of Delaware, Newark, DE 19716, USA;4. Department of Mechanical Engineering, University of Delaware, Newark, DE 19716, USA |
| |
| Abstract: | Carbon nanotubes (CNTs) have been deposited onto carbon-fiber fabric using electrophoretic deposition (EPD) prior to the infusion of epoxy resin for the production of carbon/epoxy composites. The carbon-fiber fabric employed for EPD was used in the as-received condition, in which the proprietary epoxy sizing-agent was present. CNTs were functionalized prior to EPD using ozone treatment for oxidation, followed by chemical reaction with polyethyleneimine. The CNT oxidation used a novel recirculating system which enabled ozonolysis to be conducted on large-volume solutions of CNTs in the presence of high-powered sonication, facilitating preparation of stable dispersions suitable for EPD. Significant increases in the shear strength and fracture toughness of the carbon/epoxy composites with the CNT treatment have been measured relative to composites without the CNT treatment. Analysis of fracture surfaces revealed interlaminar regions with high levels of CNTs and evidence of good adhesion between the carbon nanotubes and sized carbon-fiber, which is believed to have contributed to the measured improvement in mechanical properties. |
| |
| Keywords: | |
| 本文献已被 ScienceDirect 等数据库收录！ |
|
