首页 | 本学科首页   官方微博 | 高级检索  
     

介孔Zr(HPO42的合成及表征
引用本文:司甜,苏德咏,祝琳华.介孔Zr(HPO42的合成及表征[J].材料导报,2011,25(2):81-83,88.
作者姓名:司甜  苏德咏  祝琳华
作者单位:昆明理工大学化学工程学院,昆明,650224
基金项目:国家自然科学基金,云南省科技厅基金
摘    要:以十六烷基三甲基溴化铵(CTAB)为模板剂,采用溶胶-凝胶法配合水热晶化合成了具有短程有序介孔结构的层状化合物Zr(HPO4)2。通过XRD、N2吸附、HRTEM等技术对样品的物相、孔结构和形貌进行了表征,结果表明,按n(CTAB)∶n(Zr)=0.8引入CTAB作为模板剂所合成的前驱体在120℃水热晶化48h,可以得到比表面积为66.9m2/g、孔容为0.11cm3/g、平均孔径为8.1nm的单相Zr(HPO4)2结晶化合物。

关 键 词:介孔Zr(HPO4)2  模板剂  溶胶-凝胶法  水热晶化

Synthesis and Characterization of Mesoporous Zr(HPO4)2
SI Tian,SU Deyong,ZHU Linhua.Synthesis and Characterization of Mesoporous Zr(HPO4)2[J].Materials Review,2011,25(2):81-83,88.
Authors:SI Tian  SU Deyong  ZHU Linhua
Affiliation:(Faculty of Chemical Engineering,Kunming University of Science and Technology,Kunming 650224)
Abstract:Layer compound Zr(HPO4)2 with ordered mesoporous structure was synthesized via sol-gel route combined with hydrothermal treatment using CTAB as template,and its phase,pore structure and morphology was characterized by X-ray diffraction,N2 sorption and high resolution transmission electron microscopy(HRTEM).The results show that single phase compound Zr(HPO4)2 whose specific surface area,pore volume and average pore size are 6.9m2/g,0.11cm3/g and 8.1nm respectively can be obtained by hydrothermal crystallization of the precursor under 120℃ for 48h as well as using CTAB as template according to n(CTAB)∶n(Zr)=0.8 during the process of synthesis the sol precursor.
Keywords:mesoporous Zr(HPO4)2  template  sol-gel method  hydrothermal crystallization
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号