Abstract: | The morphology and impact properties of polystyrene-maleic anhydride/bromobutyl rubber blends have been studied as a function of interfacial modification and melt processing conditions. It is found that dimethylaminoethanol (DMAE) serves as a reactive compatibilizing agent for these blends and that the addition of DMAE results in a five-fold reduction In the size of the dispersed phase. Evidence for covalent bond formation between the DMAE and the elastomer and reactive polystyrene phases is presented. The volume average diameter of the minor phase increases significantly as the screw rotation speed and the material throughput increase. In fact, control of various material and processing parameters can be used to effectively control the particle size distribution during compounding. Impact strength measurements are shown to be clearly dependent on the quantity of DMAE in the system as well as the concentration of elastomer. Saturation of the interface with DMAE is shown to be an important consideration. |