| 基于ARM的开放式数控系统的研究 |
| |
| 引用本文： | 王孙安,张进华,吴明军.基于ARM的开放式数控系统的研究[J].现代制造工程,2007(9):54-57. |
| |
| 作者姓名： | 王孙安 张进华 吴明军 |
| |
| 作者单位： | 西安交通大学,西安,710049 |
| |
| 摘 要： | 以ARM和数字信号处理(DSP)构建底层的开放式数控平台.针对基于PC和单片机的开放式数控系统存在的不足,详细分析开放式数控系统的功能需求,硬件系统以ARM为开放式数控系统主板,以DSP构建运动控制器;软件平台由嵌入式Linux操作系统和MiniGUI图形系统构成.实现软/硬件系统的底层开放,扩展了开放式数控系统的网络功能,最终将数控系统与实际机床本体(G-CNC6135车床)进行联机切削试验.
|
| 关 键 词： | 开放式数控系统 ARM 数字信号处理 Linux 数控系统 研究 based numerical control system opening 切削试验 联机 车床 机床本体 网络功能 扩展 系统构成 图形 MiniGUI 操作系统 Linux 嵌入式 软件平台 运动控制器 系统主板 |
| 文章编号： | 1671-3133(2007)09-0054-05 |
| 修稿时间： | 2007年7月18日 |
Research opening numerical control system based on ARM |
| |
| Wang Sun-an,Zhang Jin-hua,Wu Ming-jun.Research opening numerical control system based on ARM[J].Modern Manufacturing Engineering,2007(9):54-57. |
| |
| Authors: | Wang Sun-an Zhang Jin-hua Wu Ming-jun |
| |
| Abstract: | An opening numerical control system is constructed based on ARM and DSP.Aiming at the disadvantage of the opening numerical control system based on PC or single chip,analyze the function need and wants of the opening numerical control system.The hardware flat of the opening numerical control system includes a main control board based on ARM and motion controllers based on DSP.And the software flat is constituted of the embed Linux operating system and the MiniGUI graphic system.The system realizes the open of the hardware and software flat and expands the net functions.Finally the cutting experiments have been done by connecting the opening numerical control system with the machine tool(G-CNC6135). |
| |
| Keywords: | Opening numerical control ARM DSP Linux |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
