| 超薄成形件复合模设计 |
| |
| 引用本文： | 张鑫. 超薄成形件复合模设计[J]. 模具技术, 2006, 0(6): 31-32 |
| |
| 作者姓名： | 张鑫 |
| |
| 作者单位： | 陕西国防工业职业技术学院,机械系,陕西,西安,710302 |
| |
| 摘 要： | 对振膜成形件的成形工艺进行了分析，针对该零件成形的具体要求，决定采用拉深、冲孔、切边聚氨酯橡胶复合模进行复合成形，并采用了聚氨酯橡胶凸凹模和双弹顶机构。介绍了该复合模的结构、特点及工作过程。经生产验证该模具结构合理、生产效率高，有很好的技术经济效益。
|
| 关 键 词： | 超薄成形件 复合模 设计 |
| 文章编号： | 1001-4934（2006）06-0031-02 |
| 收稿时间： | 2006-05-19 |
| 修稿时间： | 2006-05-19 |
Compound Die Design of Extreme Thin Part |
| |
| ZHANG Xin. Compound Die Design of Extreme Thin Part[J]. Die and Mould Technology, 2006, 0(6): 31-32 |
| |
| Authors: | ZHANG Xin |
| |
| Abstract: | Forming process of vibrating membrane was analyzed. In terms of specific requirement of product forming, polyurethane rubber compound die with drawing, punching and trimming function was designed. Also polyurethane rubber punch-die and double spring ejection mechanism were adopted. Structure, characteristics and working process of compound die was introduced. Manufacturing verification proves that reasonable die structure, high production efficiency with good economic benefits. |
| |
| Keywords: | extreme thin part compound die design |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
