Abstract: | This paper describes a method for the determination of scuffing propagation using a four‐ball extreme‐pressure tester. The method has been developed at the authors' laboratory and is a completely new approach to the investigation of scuffing phenomena. A series of lubricants was prepared by blending antiwear (AW) and extreme‐pressure (EP) additives with a mineral base oil. Tribological experiments were then performed using the new method. The aim was to investigate the influence of such additives on scuffing propagation. It is shown that there is a significant influence of AW and EP additives on scuffing. Surface analyses (SEM, EDS) show the decisive role of the chemical reactions of AW and EP additives with the steel surface and their creation of a surface layer whose good antiseizure properties mitigate scuffing propagation and reduce wear intensity. It must be emphasised that the authors consider scuffing to be a process leading to the cessation of the relative movement of a tribosystem, known as seizure. |