| 塑料件注射模侧向抽芯设计 |
| |
| 引用本文： | 王春伟,欧德群,庞毅,潘善苗,李泳龙,黄善辉,谢乃文.塑料件注射模侧向抽芯设计[J].中国塑料,2006,20(9):80-87. |
| |
| 作者姓名： | 王春伟 欧德群 庞毅 潘善苗 李泳龙 黄善辉 谢乃文 |
| |
| 作者单位： | 广西大学机械工程学院,广西南宁530004 |
| |
| 摘 要： | 介绍了塑料件注射模侧向抽芯设计的几种方法。对塑料件侧向抽芯的特点进行总结。正确选择侧向抽芯方法是注射模设计的关键。主要介绍了多元多向抽芯塑料件的成型工艺及模具结构特点；并详细分析了模具的动作原理和过程，为类似产品注射模具的设计提出了一条新的思路。
|
| 关 键 词： | 注射模 滑块 齿轮 齿条 侧向抽芯机构 |
| 文章编号： | 1001-9278（2006）09-0080-08 |
| 收稿时间： | 2006-03-24 |
| 修稿时间： | 2006-03-24 |
Design of Injection Mold Side Core-Pulling Mechanism for Plastics Particle |
| |
| WANG Chun-wei, OU De-qun, PANG Yi, PAN Shan-miao, LI Yong-long, HUANG Shan-hui, XIE Nai-wen.Design of Injection Mold Side Core-Pulling Mechanism for Plastics Particle[J].China Plastics,2006,20(9):80-87. |
| |
| Authors: | WANG Chun-wei OU De-qun PANG Yi PAN Shan-miao LI Yong-long HUANG Shan-hui XIE Nai-wen |
| |
| Affiliation: | School of Mechanical Engineering, Guangxi University, Nanning 530004, China |
| |
| Abstract: | Several designs of side core-pulling for plastics injection mold were introduced. The side corepulling constituted a key factor in the design of injection molds. The characteristic structures of some molds with multi-direction, multi side core were analyzed, their operation mechanism was demonstrated. |
| |
| Keywords: | injection mould slide gear rack side core-pulling mechanism |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
