首页 | 本学科首页   官方微博 | 高级检索  
     

石墨粉镀银新工艺研究
引用本文:丁国芸,夏金童,肖勇,李闯,高守磊. 石墨粉镀银新工艺研究[J]. 炭素技术, 2007, 26(5): 6-9
作者姓名:丁国芸  夏金童  肖勇  李闯  高守磊
作者单位:湖南大学,材料科学与工程学院,湖南,长沙,410082
摘    要:研究了镀液中硝酸银浓度、石墨粉加入量和阴极电流密度等工艺条件对镀银石墨粉含银量和电镀效果的影响。用扫描电镜对镀银石墨粉的微观形貌和镀覆效果进行分析,通过X射线衍射仪对镀银石墨粉高温灼烧后的剩余物进行分析测试并计算镀银石墨粉的含银量。研究结果表明:采用惰性电极作为电镀阳极,在化学镀预处理过的石墨粉表面可成功镀覆一层银,其含银量达76%。

关 键 词:石墨粉  惰性阳极  无氧镀银  含银量
文章编号:1001-3741(2007)05-0006-04
收稿时间:2007-04-20
修稿时间:2007-04-20

STUDY ON PROCESS OF SILVER ELECTROPLATING ON GRAPHITE POWDERS
DING Guo-yun,XIA Jin-tong,XIAO Yong,LI Chuang,GAO Shou-lei. STUDY ON PROCESS OF SILVER ELECTROPLATING ON GRAPHITE POWDERS[J]. Carbon Techniques, 2007, 26(5): 6-9
Authors:DING Guo-yun  XIA Jin-tong  XIAO Yong  LI Chuang  GAO Shou-lei
Affiliation:College of materials Science and Engineering, Hunan university, Changsha 410082, China
Abstract:The effects of AgNO3 concentration, the amount of graphite powders and cathode efficiency on silver content and electroplating effect of the silver electroplating graphite powders were analyzed in detail The microstructure of silver- plated graphite powders was characterized and analyzed by SEM. The remains of silver-plated graphite powders sintered at high temperature were analyzed through X- ray diffraction and the silver content was obtained. The results show that by using inert anode as positive pole, a fine and close silver layer could be electroplated on graphite powders which were pretreated by chemical plating method. The silver content of the product could reach 76%.
Keywords:Graphite powders   inertia anode   cyanide-free silver plating   silver content
本文献已被 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号