| 浅谈国内外镁合金等温锻造 |
| |
| 引用本文： | 付传锋,张钰成,赖周艺,胡亚民.浅谈国内外镁合金等温锻造[J].塑料制造,2007(1):47-51. |
| |
| 作者姓名： | 付传锋 张钰成 赖周艺 胡亚民 |
| |
| 作者单位： | [1]中国南车集团戚墅堰机车车辆工艺研究所,江苏常州213011 [2]重庆工学院材料科学与工程学院,重庆400050 |
| |
| 摘 要： | 镁合金常温下塑性差、散热快，在共晶温度以上锻造时会产生严重开裂。这就决定了镁合金不宜采用常规锻造方法。等温锻造成形过程中温度基本不变，可消除镁合金在常温下成形性能差的问题。本文介绍了国内外镁合金等温锻造的进展。
|
| 关 键 词： | 镁合金 等温锻造 |
The Development of Isothermal Forging Process on Magnesium Domestic and International |
| |
| Fu Chuan-feng,Zhang Yu-cheng,Lai Zhou-yi,Hu Ya-min.The Development of Isothermal Forging Process on Magnesium Domestic and International[J].Plastics Manufacture,2007(1):47-51. |
| |
| Authors: | Fu Chuan-feng Zhang Yu-cheng Lai Zhou-yi Hu Ya-min |
| |
| Abstract: | Magnesium alloy has poor plasticity at room temperature, and will fracture when forged above its eutectic temperature. So it is usually processed by isothermal forging, which provide selected temperature steadily to improve the plasticity of magnesium alloy. The development of isothermal forging process on magnesium alloy domestic and international was presented in this paper. |
| |
| Keywords: | magnesium alloy isothermal forging |
| 本文献已被 维普 等数据库收录！ |
