| 筒形件强旋的辊型与辊缝设计 |
| |
| 引用本文： | 梁淑贤,吴凤照.筒形件强旋的辊型与辊缝设计[J].广东有色金属学报,1995,5(2):151-154. |
| |
| 作者姓名： | 梁淑贤 吴凤照 |
| |
| 作者单位： | 广州有色金属研究院 |
| |
| 摘 要： | 探讨了旋压工艺中辊轮导入角对材料变形的影响和三辊错距成形角与辊缝设计的关系，并根据道次减薄率，材料变形回弹和机械回弹等因素，设计合理的辊缝，以获得理想的变形状态和成品精度。
|
| 关 键 词： | 辊型 辊缝 旋压 导入角 减薄率 筒形件 |
POWERFUL SPINNING ROLL. SHAPE AND ROLL SEAM DESIGN OF CYLINDRICAI.WORKPIECES |
| |
| LIANC Shuxian,WU Fengzhao,ZHANG Chunfang, ZHANG Zhongcheng,HUANG Jing.POWERFUL SPINNING ROLL. SHAPE AND ROLL SEAM DESIGN OF CYLINDRICAI.WORKPIECES[J].Journal of Guangdong Non-Ferrous Metals,1995,5(2):151-154. |
| |
| Authors: | LIANC Shuxian WU Fengzhao ZHANG Chunfang ZHANG Zhongcheng HUANG Jing |
| |
| Abstract: | The effect of the roll leading-in angle on the material deformation and the relation between the three-roll-staggered forming angle and the roll seam design are studied and discussed. According to factors like the pass reduction rate,material deformation resilience and mechanical resilience,reasonable roll seams are designed so that ideal deformation state and finished product precision can be obtained. |
| |
| Keywords: | roll shape roll seam spinning leading-in angle reduction rate |
| 本文献已被 CNKI 维普 等数据库收录！ |
