Heat transfer in a turbulent jet impinging on a moving plate considering high plate-to-jet velocity ratios

In this paper, heat transfer characteristics of a turbulent slot jet impinging orthogonally on an isothermal moving hot plate is studied numerically. The governing equations were discretized using the finite volume method and the υ ² — f turbulence model was employed for turbulence modeling. The effect of the jet Reynolds number and the plate-to-jet velocity ratio (R) on the Nusselt were investigated. Despite of most previous studies, which have been restricted to R≤2, in the present research higher values of R, also were considered (0≤R≤6). Range of studied jet Reynolds number was between 3000 and 60000. The results indicate that at a fixed plate-to-jet velocity ratio increment of the Reynolds number leads to the enhancement of the average Nusselt number. For each Reynolds number, the average Nusselt number reduces with increasing the plate-to-jet velocity ratio until it becomes minimum at R = 1.25. For R>1.25 trend changes so that these parameters increase. In addition, it was found that only for R>2.5 the average Nusselt number is improved due to the plate motion in comparison with the stationary jet. The results are validated against available experimental data, showing good agreement.