| 切触在侧铣加工叶轮直纹面上的应用 |
| |
| 引用本文： | 刘鹄然,刘全红.切触在侧铣加工叶轮直纹面上的应用[J].杭州应用工程技术学院学报,2013(5):351-356. |
| |
| 作者姓名： | 刘鹄然 刘全红 |
| |
| 作者单位： | 浙江科技学院机械与汽车工程学院,杭州310023 |
| |
| 摘 要： | 提出用侧铣方法加工叶轮曲面的切触理论，按接触条件确定刀具圆柱表面与工件的相对位置，按切触条件确定刀具的相对姿态。介绍了叶轮抛物面叶片表面的加工计算算例，其加工计算方便，加工效率高。相比于端铣加工，可大幅度减小切削余量。
|
| 关 键 词： | 铣刀 接触 数控工艺 |
Application of contact on NC side milling of ruled surface with cylindrical cutter |
| |
| LIU Huran,LIU Quanhong.Application of contact on NC side milling of ruled surface with cylindrical cutter[J].Journal of Hangzhou Institute of Applied Engineering,2013(5):351-356. |
| |
| Authors: | LIU Huran LIU Quanhong |
| |
| Affiliation: | (School of Mechanical and Automotive Engineering, Zhejiang University of Science and Technology, Hangzhou 310023, China) |
| |
| Abstract: | The contact theory and its application in the side milling of the ruled surface with cylindrical cutter is presented. The machining position and the posture is determined by the contact condition. An example of machining of impeller blade surface is introduced. The machining computation is convenient side milling , end milling reduces the and the machining efficiency is high. Compared with the cutting remains obviously. |
| |
| Keywords: | milling cutter contact NC machining |
| 本文献已被 维普 等数据库收录！ |
