T700/3234预浸料自动铺带工艺研究 |
| |
引用本文: | 何凯,龚志红,徐恒元,文友谊,罗美兰. T700/3234预浸料自动铺带工艺研究[J]. 玻璃钢/复合材料, 2017, 0(4). DOI: 10.3969/j.issn.1003-0999.2017.04.016 |
| |
作者姓名: | 何凯 龚志红 徐恒元 文友谊 罗美兰 |
| |
作者单位: | 成都飞机工业(集团)有限责任公司,成都,610092 |
| |
摘 要: | 通过研究自动铺带设定温度对预浸料粘性的影响以及自动铺带橡胶辊压力和带间间隙对层压板性能的影响,讨论了T700/3234单向环氧预浸料自动铺带工艺特性,确定了T700/3234的自动铺带工艺参数,满足了大型复合材料壁板类产品的制造要求。
|
关 键 词: | T700/3234 自动铺带 温度 辊压 带间间隙 |
STUDY ON THE ATL TECHNOLOGY FOR PREPREG T700/3234 |
| |
Abstract: | The Automatic Tape Layup (ATL) technique is extensively applied on laying up the unidirectional prepreg for the large-scale composite panels of an aircraft, instead of artificial.In this paper, by studying on how the heating temperature has influence on the prepreg tack and how pressure from the rubber roll and gap between two tapes have influence on the lamination performance when using ATL, the automatic tape layup technology for an unidirectional tape prepreg, T700/3234 is discussed, and the appropriate processing parameters are determined when T700/3234 is used for ATL, such as the heating temperature should be set as 50 ℃, the pressure from the rubber should be 7 Bar and the gap between two tapes should be set as 1 mm.A large-scale wing panel from T700/3234 composite has been successfully manufactured by the ATL parameters for a fighter. |
| |
Keywords: | T700/3234 ATL temperature pressure from roll gap between tapes |
本文献已被 CNKI 万方数据 等数据库收录! |
|