| 先进拉挤工艺下工字梁固化温度场的二维数值模拟 |
| |
| 引用本文： | 迟建涛,肖军,齐俊伟.先进拉挤工艺下工字梁固化温度场的二维数值模拟[J].玻璃钢/复合材料,2017(4). |
| |
| 作者姓名： | 迟建涛 肖军 齐俊伟 |
| |
| 作者单位： | 南京航空航天大学材料科学与技术学院,南京,210016 |
| |
| 基金项目： | 江苏高校优势学科建设工程资助项目 |
| |
| 摘 要： | 碳纤维增强复合材料在固化成型过程中,其温度与固化度的变化历程具有强耦合关系,以含有非线性内热源的瞬态热传导方程为基础,利用有限容积法编写了计算程序,研究了以T300/环氧预浸料为材料的某复合材料工字形地板梁在先进拉挤工艺下的温度、固化度的变化历程。结果表明:该工字形地板梁在厚度为5.9 mm时,固化过程中的温度场和固化度场基本可以认为是均匀的,其厚度不会对固化质量产生较大影响;当该工字梁的厚度达到11 mm时,制件最高温度比模具温度高出了10.7℃,这时制件厚度已对制件的固化质量产生较大影响。
|
| 关 键 词： | 工字梁 先进拉挤工艺(ADP) 固化度 温度 有限容积法 |
TWO DIMENSIONAL SIMULATION OF TEMPERATURE FIELD FOR THE I-SHAPED BEAM DURING THE ADVANCED PULTRUSION |
| |
| CHI Jian-tao,XIAO Jun,QI Jun-wei.TWO DIMENSIONAL SIMULATION OF TEMPERATURE FIELD FOR THE I-SHAPED BEAM DURING THE ADVANCED PULTRUSION[J].Fiber Reinforced Plastics/Composites,2017(4). |
| |
| Authors: | CHI Jian-tao XIAO Jun QI Jun-wei |
| |
| Abstract: | The degree of curing and temperature are coupled during the advanced pultrusion (ADP) of carbon fiber reinforced plastics (CFRP).This paper is based on the thermal conduct theory with nonlinear source, using finite volume method to study the history of temperature and degree of curing during the curing of I-shaped beam in the advanced pultrusion.It is found that the temperature field and curing degree field of the I-shaped beam are uniform, and the thickness will not have a great impact on the quality of curing.When the thickness of the beam reaches 11 mm, the highest temperature will be 10.7 ℃ higher than the mold temperature, and the thickness will have a great impact on the curing quality of the beam. |
| |
| Keywords: | I-shaped beam ADP degree of cure temperature finite volume theory |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
