Effects of vegetable-based cutting fluids on the wear in drilling |
| |
Authors: | BABUR OZCELIK EMEL KURAM ERHAN DEMIRBAS EMRAH ŞIK |
| |
Affiliation: | 1. Department of Mechanical Engineering, Gebze Institute of Technology, 41400, Gebze-Kocaeli, Turkey 2. Department of Chemistry, Gebze Institute of Technology, 41400, Gebze-Kocaeli, Turkey
|
| |
Abstract: | This study focuses on both formulation of vegetable-based cutting fluids (VBCFs) and machining with these cutting fluids. For this purpose, characterizations of chemical and physical analyses of these formulated cutting fluids are carried out. In this study, performances of three VBCFs developed from crude sunflower oil, refined sunflower oil, refined canola oil and commercial semi-synthetic cutting fluid are compared in terms of tool wear, thrust force and surface roughness during drilling of AISI 304 austenitic stainless steel with HSSE tool. Experimental results show that canola-based cutting fluid gives the best performance due to its higher lubricant properties with respect to other cutting fluids at the constant cutting conditions (spindle speed of 750 rpm and feed rate of 0.1 mm/rev). |
| |
Keywords: | |
本文献已被 SpringerLink 等数据库收录! |
|