首页 | 本学科首页   官方微博 | 高级检索  
     

热处理对PTT短纤维力学性能的影响
引用本文:刘颖,任永花,俞建勇. 热处理对PTT短纤维力学性能的影响[J]. 合成纤维工业, 2005, 28(3): 19-21
作者姓名:刘颖  任永花  俞建勇
作者单位:东华大学纺织学院,上海,200051;东华大学纺织学院,上海,200051;东华大学纺织学院,上海,200051
摘    要:研究了PTT短纤维热处理前后的力学性能,并与PET纤维进行了对比。结果表明,PTT短纤维具有优良的弹性性能,其断裂伸长率和弹性回复比PET纤维高。经100℃热处理后,PTT纤维的强伸性能降低,在应力1.0cN和10%伸长下的弹性显著减弱,说明热处理对PTT的弹性性能具有较大的影响。

关 键 词:聚对苯二甲酸丙二酯纤维  聚对苯二甲酸乙二酯纤维  热处理  力学性能  回弹性
文章编号:1001-0041(2005)03-0019-03
修稿时间:2004-09-22

Effect of heat treatment on mechanical properties of PTT staple fiber
Liu Ying,Ren Yonghua,YU Jianyong. Effect of heat treatment on mechanical properties of PTT staple fiber[J]. China Synthetic Fiber Industry, 2005, 28(3): 19-21
Authors:Liu Ying  Ren Yonghua  YU Jianyong
Abstract:The mechanical properties of PIT staple fiber were studied before and after heat treatment and were compared with those of PET fiber. The results showed that PTT staple fiber had splendid elasticity and showed higher elongation at break and e-lastic resiliency as compared with PET fiber. After heat treatment at 100℃, the strength and elongation of PTT fiber were decreased and the elasticity was decreased considerably at 1.0 cN stress and 10% elongation, which indicated that the heat treatment had a profound effect on the elasticity of PTT fiber.
Keywords:polytrimethylene terephthalate fiber  polyethylene terephthalate fiber  heat treatment  mechanical properties  resiliency
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号