| 连铸生产焊接气瓶钢中夹杂物 |
| |
| 引用本文： | 王文军, 王新华, 张炯明, 王万军, 王德城, 周有预. 连铸生产焊接气瓶钢中夹杂物[J]. 工程科学学报, 2000, 22(6): 520-523. DOI: 10.13374/j.issn1001-053x.2000.06.009 |
| |
| 作者姓名： | 王文军 王新华 张炯明 王万军 王德城 周有预 |
| |
| 摘 要： | 对转炉—RH真空处理一连铸生产焊接气瓶钢各个工艺阶段钢中非金属夹杂物的形貌、尺寸、组成及来源等进行了系统的研究.结果发现钢包渣与钢液作用而生成的夹杂物在浇注过程中可以从钢液中上浮去除,尺寸小于40 μm的角状和蔟群状的Al2O3夹杂物则难以完全从钢液中排出而滞留在钢中,从而构成铸坯中非金属夹杂物的主要来源.铸坯中T[O](14-16)×10-6之间,非金属夹杂物含量为0.09-0.15mg/kg,表明所生产的铸坯具有较高的洁净度.
|
| 关 键 词： | 焊接气瓶钢 连铸 非金属夹杂物 |
| 收稿时间： | 2000-05-23 |
Non-Metallic Inclusions in Continuously Caststeel for Pressure Vessels |
| |
| WANG Wenjun, WANG Xinhua, ZHANG Jiongming, WANG Wanjun, WANG Decheng, ZHOU Youyu. Non-Metallic Inclusions in Continuously Caststeel for Pressure Vessels[J]. Chinese Journal of Engineering, 2000, 22(6): 520-523. DOI: 10.13374/j.issn1001-053x.2000.06.009 |
| |
| Authors: | WANG Wenjun WANG Xinhua ZHANG Jiongming WANG Wanjun WANG Decheng ZHOU Youyu |
| |
| Abstract: | Non-metallic inclusions in the steel for pressure vessels produced through BOF-RH-Continuous Casting technological process were investigated systemically. The morphology, size, composition and origination of the inclusions were analyzed. It is concluded that the inclusions in the slabs are mainly small-sized angular alumina inclusions and alumina clusters (<40 μm), while the larger ones together with the resultants of reaction between ladle slag and molten steel were removed by floating out during casting. The total oxygen of the slab is in the range of (14-16)×10-6 and the amount of the inclusions in the slabs changes from 0.09 -0. 15 mg/kg, Which indicate the high cleanliness of the slabs. |
| |
| Keywords: | steel for pressure vessels continuous casting non-metallic inclusions |
|
| 点击此处可从《工程科学学报》浏览原始摘要信息 |
|
点击此处可从《工程科学学报》下载全文 |
|
