| 碳含量对宝钢结晶器平均热流影响 |
| |
| 引用本文： | 朱志远, 王新华, 王万军, 张立, 史国敏. 碳含量对宝钢结晶器平均热流影响[J]. 工程科学学报, 2000, 22(5): 447-450. DOI: 10.13374/j.issn1001-053x.2000.05.014 |
| |
| 作者姓名： | 朱志远 王新华 王万军 张立 史国敏 |
| |
| 摘 要： | 研究了碳含量对板坯结晶器平均热流的影响.结果表明结晶器宽边平均热流和窄边平均热流与钢的碳含量之间均存在着明显关系.但分别对应宽边和窄边平均热流,其出现最高和最低点的碳含量不同.
|
| 关 键 词： | 连铸 结晶器 平均热流 碳含量 |
| 收稿时间： | 1999-12-27 |
Relationship between the Carbon Content and the Average Heat Flux of Continuous Casting Mould |
| |
| ZHU Zhiyuan, WANG Xinhua, WANG Wanjun, ZHANG Li, SHI Guomin. Relationship between the Carbon Content and the Average Heat Flux of Continuous Casting Mould[J]. Chinese Journal of Engineering, 2000, 22(5): 447-450. DOI: 10.13374/j.issn1001-053x.2000.05.014 |
| |
| Authors: | ZHU Zhiyuan WANG Xinhua WANG Wanjun ZHANG Li SHI Guomin |
| |
| Abstract: | The affection of the carbon content on the average heat flux of mould of slab coninuous casting was discussed. The results indicated that carbon content had strong whuences on the average heat flux of broad face and narrow face of mould. But to the maximum and minimum average heat flux of the broad face and the narrow face, the carbon collen were different. |
| |
| Keywords: | continuous casting mould average heat flux carbon content |
|
| 点击此处可从《工程科学学报》浏览原始摘要信息 |
|
点击此处可从《工程科学学报》下载全文 |
|
