| 精轧工艺参数对Ti-IF钢第二相粒子析出行为的影响 |
| |
| 引用本文： | 商建辉, 王先进, 茹铮, 钟定忠. 精轧工艺参数对Ti-IF钢第二相粒子析出行为的影响[J]. 工程科学学报, 2000, 22(1): 44-48. DOI: 10.13374/j.issn1001-053x.2000.01.037 |
| |
| 作者姓名： | 商建辉 王先进 茹铮 钟定忠 |
| |
| 摘 要： | 通过采用新型的热模拟技术研究表明,不同精轧总变形量和道次变形分配量对TiC相粒子析出行为均有较大的影响,而对于TiN,TiS和Ti4C4S2这3种较粗大的析出物影响不大.两者之间的合理配置将有利于形成粗大、稀疏的TiC粒子,
|
| 关 键 词： | Ti-IF钢 第二相粒子 析出 精轧 |
| 收稿时间： | 1999-04-18 |
Effect of Total Finish-rolling Strain and Pass Strains on Precipitating Behavior in Ti-IF Steels |
| |
| SHANG Jianhui, WANG Xianjin, RU Zheng, ZHONG Dingzhong. Effect of Total Finish-rolling Strain and Pass Strains on Precipitating Behavior in Ti-IF Steels[J]. Chinese Journal of Engineering, 2000, 22(1): 44-48. DOI: 10.13374/j.issn1001-053x.2000.01.037 |
| |
| Authors: | SHANG Jianhui WANG Xianjin RU Zheng ZHONG Dingzhong |
| |
| Abstract: | The effect of total finish-rolling strain and pass strains on the precipitating behavior of TiC has been discussed, using the thermomechanical simulation technique. Results show that the total finish-rolling strain and pass strains have an important effect on precipitation behavior of TiC particles, and proper match of them would be benefit to get a sparse dispersion of coarse TiC particles. |
| |
| Keywords: | Ti-IF steels second-phase precipitates precipitation finish-rolling |
|
| 点击此处可从《工程科学学报》浏览原始摘要信息 |
|
点击此处可从《工程科学学报》下载全文 |
