首页 | 本学科首页   官方微博 | 高级检索  
     

薄板坯结晶器内卷渣现象的研究
引用本文:包燕平, 朱建强, 蒋伟, 王昌旭, 田乃媛, 徐保美. 薄板坯结晶器内卷渣现象的研究[J]. 工程科学学报, 1999, 21(6): 530-534. DOI: 10.13374/j.issn1001-053x.1999.06.006
作者姓名:包燕平  朱建强  蒋伟  王昌旭  田乃媛  徐保美
摘    要:基于相似原理,采用1:1的水模型,模拟了薄板坯连铸结晶器内钢液-保护渣界面的流场,通过采用SG200水工数据采集系统对液而波动进行了定量测量.结合流场显示研究了薄板坯连铸结晶器内钢液的卷渣机理,得出了薄板坯连铸结晶器内钢液的主要卷渣方式为旋涡卷渣和剪切卷渣.研究了各工艺参数,即水日类型、浸入深度、水口出口倾角、拉速等,对保护渣卷人量、卷入方式、卷人深度的影响.

关 键 词:薄板坯连铸  水模型  结晶器  卷渣
收稿时间:1999-07-05

Water Modeling Research on Slag-Entrapment in the Mould of Thin Slab Continuous Caster
Bao Yanping, Zhu Jianqiang, Jiang Wei, Wang Changxu, Tian Naiyuan, Xu Baomei. Water Modeling Research on Slag-Entrapment in the Mould of Thin Slab Continuous Caster[J]. Chinese Journal of Engineering, 1999, 21(6): 530-534. DOI: 10.13374/j.issn1001-053x.1999.06.006
Authors:Bao Yanping  Zhu Jianqiang  Jiang Wei  Wang Changxu  Tian Naiyuan  Xu Baomei
Abstract:Based on the Similarity criteria, series water modeling experiments have been carried out to investigate the mechanisms of powder entrapment in the mould of thin slab continuous caster. SG200 hydraulic experiment system was applied to measure the wave amplitude. The main mode of the powder entraps into the steel and the influences of the technique parameter to entrap depth and mode have been obtained.
Keywords:thin slab continuous casting  water-modeling  mould  mould powder entrapment
点击此处可从《工程科学学报》浏览原始摘要信息
点击此处可从《工程科学学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号