| 印染废水处理工程设计 |
| |
| 引用本文： | 王颖.印染废水处理工程设计[J].广州化工,2011,39(16):111-112,148. |
| |
| 作者姓名： | 王颖 |
| |
| 作者单位： | 东华工程科技股份有限公司,安徽合肥,230024 |
| |
| 摘 要： | 针对印染废水的水质特点,本文采用水解酸化与接触氧化相结合的生化工艺对废水进行处理。设计进水水质CODcr=900 mg/L,BOD5=330 mg/L,pH=11～13,出水水质执行国家《污水综合排放标准》一级标准。
|
| 关 键 词： | 印染废水 水解酸化 接触氧化 |
Engineering Design on Waster Water Treatment of Printing and Dyeing |
| |
| WANG Ying.Engineering Design on Waster Water Treatment of Printing and Dyeing[J].GuangZhou Chemical Industry and Technology,2011,39(16):111-112,148. |
| |
| Authors: | WANG Ying |
| |
| Affiliation: | WANG Ying(East China Engineering Science and Technology Co.,Ltd.,Anhui Hefei 230024,China) |
| |
| Abstract: | Based on the characteristics of printing and dyeing wasterwater,biochemical process of an integrated hydrolytic acidification and contact oxidation was adopted for printing and dyeing wastewater treatment.If the influent CODcr=900 mg/L,BOD5=330 mg/L,pH=11～13,the effluent after treatment can meet the requirement of national integrated Wastewater Discharge Standards Ⅰ. |
| |
| Keywords: | printing and dyeing wasterwater hydrolytic acidification contact oxidation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
