| 曲柄摇杆机构杆长的确定 |
| |
| 引用本文： | 李宏亮,侯悦民,黄民,王雪雁. 曲柄摇杆机构杆长的确定[J]. 机械工程师, 2014, 0(2): 20-22 |
| |
| 作者姓名： | 李宏亮 侯悦民 黄民 王雪雁 |
| |
| 作者单位： | 北京信息科技大学机电工程学院; |
| |
| 基金项目： | 北京市教委科研基金资助项目(SQKM201211232002) |
| |
| 摘 要： | 分析了平面连杆机构的运动特性,通过各杆之间的几何关系,确定了各杆杆长关系.在一些参数已知的情况下,联立方程组,通过计算机计算得出了各杆长度,进而绘制出曲柄一定、传动角逐渐增大的情况下摆角与铰链A点偏移劣弧程度的数据曲线.
|
| 关 键 词： | 曲柄摇杆机构 极位夹角 传动角 |
Determination of the Connecting Rod Length of the Crank-rocker Mechanism |
| |
| LI Hongliang;HOU Yuemin;HUANG Min;WANG Xueyan. Determination of the Connecting Rod Length of the Crank-rocker Mechanism[J]. Mechanical Engineer, 2014, 0(2): 20-22 |
| |
| Authors: | LI Hongliang HOU Yuemin HUANG Min WANG Xueyan |
| |
| Affiliation: | LI Hongliang;HOU Yuemin;HUANG Min;WANG Xueyan;School of Eleclromechanical Engineering,Beijing Information Science and Technology University; |
| |
| Abstract: | The motion characteristics of planner linkage are analyzed. The geometric relationship of the connecting rods is analyzed to obtain the relationship of connecting rods length. The known parameters and simultaneous equations are used to calculate the connecting rods length by computer. When the crank size is given and transmission angle is increasing, the data curve of the swing angle and the offset degree of the hinge point A from minor arc is drawn out. |
| |
| Keywords: | crank-rocker mechanism crank angle between extreme positions transmission angle |
| 本文献已被 CNKI 维普 等数据库收录！ |
