Role of the surface state of Ni/Al2O3 in partial oxidation of CH4

The effect of gas phase O₂ and reversibly adsorbed oxygen on the decomposition of CH₄ and the surface state of a Ni/Al₂O₃ catalyst during partial oxidation of CH₄ were studied using the transient response technique at atmospheric pressure and 700°C. The results show that, when the catalyst surface is completely oxidized under experimental conditions, only a small amount of CO and H₂ can be produced from non‐selective oxidation of CH₄ by reversibly adsorbed oxygen which is more active in oxidizing CH₄ completely than NiO via the Rideal–Eley mechanism and both the conversions of CH₄ and O₂ and the selectivities to CO and H₂ are very low. Therefore, keeping the catalyst surface in the reduced state is the precondition of high conversion of CH₄ and high selectivities to CO and H₂. The surface state of the catalyst decides the reaction mechanism and plays a very important role in the conversions and selectivities of partial oxidation of CH₄. During partial oxidation of CH₄, no oxygen species but a small amount of carbon exists on the catalyst surface, which is favorable for maintaining the catalyst in the reduced state and the selectivity of CO. The results also indicate that direct oxidation is the main route for partial oxidation of CH₄, and the indirect oxidation mechanism is not able to gain dominance in the reaction under the experimental conditions. This revised version was published online in July 2006 with corrections to the Cover Date.