首页 | 本学科首页   官方微博 | 高级检索  
     

ER70s 6焊丝钢洁净度和表面质量研究
引用本文:王剑斌,李京社,杨树峰,黄运华,胡道锋,李翔.ER70s 6焊丝钢洁净度和表面质量研究[J].中国冶金,2007,17(5):41-41.
作者姓名:王剑斌  李京社  杨树峰  黄运华  胡道锋  李翔
作者单位:1.北京科技大学冶金与生态工程学院,北京 100083;2.南京钢铁集团公司第二炼钢厂,江苏 南京 210035
摘    要:钢的洁净度和铸坯的表面缺陷直接影响焊丝钢的性能。分析了炼钢各工序钢液中的全氧和夹杂物数量、夹杂物成分和形貌;统计了铸坯的表面缺陷。其结果表明,钢中夹杂物主要有以MnO Al2O3 SiO2 CaO为主的复合脱氧氧化物夹杂物、MnO Al2O3脱氧产物夹杂,铸坯表面缺陷主要有表面气孔和表面裂纹。

关 键 词:焊丝钢  钢包  非金属夹杂物  
文章编号:1006-9356(2007)05-0041-04
修稿时间:2006-12-04

Cleanness and Surface Quality Research of ER70s-6 Weld Wire Steel
Wang Jian-bin,LI Jing-she,YANG Shu-feng,HUANG Yun-hua,HU Dao-feng,LI Xiang.Cleanness and Surface Quality Research of ER70s-6 Weld Wire Steel[J].China Metallurgy,2007,17(5):41-41.
Authors:Wang Jian-bin  LI Jing-she  YANG Shu-feng  HUANG Yun-hua  HU Dao-feng  LI Xiang
Affiliation:1. Metallurgical and Ecological Engineering School, University of Science and Technology Beijing,Beijing 100083, China;2. Second Steel Plant of Nanjing Iron and Steel Corporation,Nianjing 210035, Jiangshu, China
Abstract:The purity of steel has direct effect on its mechanical properties, the oxygen content.inclusion quantity, the component of inclusion and the inclusion appearance were analyzed , and also the surface flaw was counted. The result shows that the main type of inclusions in the ER70s-6 weld wire steel is complex oxide system, including MnO-Al2O3-SiO2-CaO system, MnO -SiO2 system and there are two surface flaw on the continuous cast slab, one is surface pores, the other is surface crack.
Keywords:weld wire steel  ladle furnace  non-metallic inclusion
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《中国冶金》浏览原始摘要信息
点击此处可从《中国冶金》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号