|
|||||
|
|
| 苜蓿草粉对金属材料磨损表面的分形维数计算 | |
| 引用本文： | 黄晓鹏,黄建龙,吴劲锋,万芳新,张克平.苜蓿草粉对金属材料磨损表面的分形维数计算[J].润滑与密封,2010,35(1). |
| 作者姓名： | 黄晓鹏 黄建龙 吴劲锋 万芳新 张克平 |
| 作者单位： | 1. 兰州理工大学机电学院,甘肃兰州,730070;甘肃农业大学工学院,甘肃兰州,730050 2. 兰州理工大学机电学院,甘肃兰州,730070 3. 甘肃农业大学工学院,甘肃兰州,730050 |
| 基金项目： | 农业部牧草种子基地建设项目，甘肃省教育厅资助项目 |
| 摘 要： | 基于分形理论和扫描电镜分析,采用差分计数盒法(DBC)计算了苜蓿草粉对金属材料磨损表面的三维分形维数。结果表明:基于DBC法和磨损表面SEM照片计算所得的分形维数,可以表征苜蓿草粉对金属材料磨损表面的形貌特征;相同加工条件下的金属加工表面具有相近的分形维数,但不能通过分形维数区分材料;苜蓿草粉磨损后的磨损表面分形维数与磨损体积损失有着密切的关系,体积磨损量越大,分形维数也越大。 |
| 关 键 词： | 苜蓿草粉 金属材料 磨损表面 差分计数盒法 分形维数 |
Calculation of Fractal Dimension of Worn Surface of Metal Materials by Alfalfa Powder |
|
| Huang Xiaopeng,Huang Jianlong,Wu Jingfeng,Wan Fangxin,Zhang Keping.Calculation of Fractal Dimension of Worn Surface of Metal Materials by Alfalfa Powder[J].Lubrication Engineering,2010,35(1). | |
| Authors: | Huang Xiaopeng Huang Jianlong Wu Jingfeng Wan Fangxin Zhang Keping |
| Affiliation: | Huang Xiaopeng1,2 Huang Jianlong1 Wu Jingfeng2 Wan Fangxin2 Zhang Keping1,2 (1.College of Mechanical , Electronical Engineering,Lanzhou University of Technology,Lanzhou Gansu 730070,China,2.College of Engineering,Gansu Agricultural University,Lanzhou Gansu 730050,China) |
| Abstract: | Differential box-counting(DBC)method was applied to compute the three-dimensional fractal dimensions of the worn surfaces of metal materials by alfalfa powder based on fractal theory and scaning electron microscopic(SEM) analysis of the worn surfaces.The results show that it is feasible to characterize the worn surface morphologies using the fractal dimensions based on DBC and SEM analysis.Surfaces of the metal materials by the same processing method have similar fractal dimension,but can not be distinguish... |
| Keywords: | alfalfa powder metal material worn surface differential box-counting fractal dimension |
| 本文献已被 CNKI 万方数据 等数据库收录！ | |