| 用气冲气推成形触头造型机制造电机壳铸型的试验研究 |
| |
| 引用本文： | 谢祖锡. 用气冲气推成形触头造型机制造电机壳铸型的试验研究[J]. 铸造, 2006, 55(2): 116-119 |
| |
| 作者姓名： | 谢祖锡 |
| |
| 作者单位： | 台州学院,浙江,临海,317000 |
| |
| 摘 要： | 扼要介绍了用气冲气推成形触头造型机制造电机壳铸型的成型过程及其实砂效果,试验结果表明,在工作气压为0,4￣0.45MPa的条件下,气冲气推成形触头造型机对电机壳类铸型的紧实,实砂效果十分理想,砂型紧实度高而且均匀。
|
| 关 键 词： | 电机壳 铸型 气冲 气推 造型机 |
| 文章编号： | 1001-4977(2006)02-0116-04 |
| 收稿时间： | 2005-09-19 |
| 修稿时间： | 2005-10-13 |
Experimental Investigation of Air Impact Molding Machine with Formed Squeeze Head for Combined Mould of Green Sand of Motor Housing |
| |
| XIE Zu-xi. Experimental Investigation of Air Impact Molding Machine with Formed Squeeze Head for Combined Mould of Green Sand of Motor Housing[J]. Foundry, 2006, 55(2): 116-119 |
| |
| Authors: | XIE Zu-xi |
| |
| Affiliation: | Taizhou Uiversity, Linhai 317000, Zhejiang, China |
| |
| Abstract: | Compacting process and compacting effects of air impact molding machine with formed squeeze head for combined mould of green sand of motor housing casting were introduced.The results indicate that the compacting effects of this molding machine for compacted mould of green sand of motor housing were very good in the operational air pressure between 0,4-0.45 MPa,Sand mold compact ability is high and homogeneous. |
| |
| Keywords: | motor housing casting mould air impact formed squeeze head molding machine |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
